Magna Lif MALH Specifications

Return to Overview

MACHINE DIMENSIONS
MACHINE NUMBER:		#3 MALH	#4 MALH	#5 MALH	#5.5 MALH
INSIDE TANK:
Length	A	45.00"	57.00"	69.00"	87.00"
Width	B	43.00"	48.00"	53.00"	53.00"
Depth	C	40.50"	40.50"	40.50"	40.50"
DIPPING SPACE:
Length	D	41.00"	53.00"	65.00"	83.00"
Width (See Note 1)	E	24.00"	29.00"	34.00"	34.00"
Depth (See Note 2)	F	26.00"	26.00"	26.00"	26.00"
OVERALL TANK (approx.):
Length	G	48.00"	60.00"	72.00"	90.00"
Width	H	45.50"	50.50"	55.50"	55.50"
Height	J	45.50"	45.50"	45.50"	45.50"
OVERALL MACHINE (approx.):
Length (gas heat)	K	66.00"	78.00"	90.00"	108.00"
Length (all others)	K	54.00"	66.00"	78.00"	96.00"
Width	L	65.00"	70.00"	75.00"	75.00"
Height	M	90.00"	90.00"	90.00"	90.00"
ROLLER PLATFORM:
Total Length	O	40.00"	52.00"	64.00"	82.00"
Roller Width	P	22.00"	27.00"	32.00"	32.00"
SOLUTION LEVEL:
Height (nominal)	N	32.50"	32.50"	32.50"	32.50"

SERVICE CONNECTIONS
MACHINE NUMBER:	#3 MALH	#4 MALH	#5 MALH	#5.5 MALH
ALL MACHINES (heated or unheated):
Air Supply (maximum PSI) (See Note 2)	125	125	125	125
Air Inlet (NPT)	0.50"	0.50"	0.50"	0.50"
Water Inlet (NPT)	1.00"	1.00"	1.25"	1.25"
Drain Valve (NPT)	2.00"	2.00"	2.00"	2.00"
Overflow (NPT)	2.00"	2.00"	2.00"	2.00"
Vapor Exhaust (diameter)	4.00"	4.00"	6.625"	6.625"
ELECTRICAL SUPPLY: (See Note 3)
240V/3/60Hz	61A	61A	90A	119A
480V/3/60Hz	32A	32A	47A	61A
GAS HEATED MACHINES:
Supply Inlet (NPT)	1.00"	1.00"	1.00"	1.00"
Fume Exhaust (diameter)	4.00"	4.00"	4.00"	4.00"
STEAM HEATED MACHINES:
Inlet/Outlet (NPT)	1.00"	1.00"	1.00"	1.00"

GENERAL DATA
MACHINE NUMBER:	#3 MALH	#4 MALH	#5 MALH	#5.5 MALH
Load Capacity @ 100 PSI (lbs.)	1000	1000	1000	1000
Liquid Capacity (gal.)	272	385	514	648
Tank Wall Thickness (ga.)	#10	#10	#10	#10
Shipping Weight (approx. lbs.)	1800	2040	2600	3000

HEATING DATA (See Note 4)
MACHINE NUMBER:	#3 MALH	#4 MALH	#5 MALH	#5.5 MALH
HOURLY FUEL CONSUMPTION FROM COLD START:
Electric (kW) (See Note 3)	24	24	36	48
Natural Gas (cu. ft./hr.)	115	235	257	257
Steam (lbs./hr.)	85	110	175	220
HEAT TIME FROM COLD START:
Electric (hrs.)	4.50	4.50	4.50	4.50
Gas or Steam (hrs.)	3.50	3.50	3.50	3.50

AGITATION DATA
Agitation Cycle (See Note 5)	Short	Medium	Long
Strokes (per min.) (See Note 6)	100-140	50-60	20-24
Stroke Length	5-7"	11-13"	In-Out

BASKET DIMENSIONS (inside)
MACHINE NUMBER:		#3 MALH	#4 MALH	#5 MALH	#5.5 MALH
Length	W	33.25"	45.00"	55.25"	74.25"
Width	X	19.25"	23.00"	28.50"	28.50"
Depth	Y	12.00"	14.00"	16.00"	16.00"
Overall Height	Z	20.00"	20.00"	20.00"	20.00"

NOTES

1. With roller platform, Dipping Depth (F) is reduced by 1.50" and Width (E) is reduced by 2.00".
2. Lighter loads can operate at reduced air pressure.
3. All electric heaters used are stainless steel sheathed elements. Other voltages and phases on request. Stainless steel heating coils for gas and steam heated models are optional.
4. Fuel consumption and heat up times listed are based on heating from room temperature to 180° F.
5. The data shown is typical and may vary with air pressure, load weight, shape, and stroke length. Air consumption 20-28 CFM (free air) with normal load on short stroke for Magna Lif MALH models.
6. A stroke equals travel in one direction.