MACHINE DIMENSIONS
MACHINE NUMBER:		24 1X	24 1.5X	24 2X
INSIDE TANK:
Length	A	23.50"	36.75"	49.75"
Width	B	33.50"	33.50"	33.50"
Depth (nominal)	C	30.50"	30.50"	30.50"
DIPPING SPACE:
Length	D	22.00"	35.25"	48.25"
Width	E	22.00"	22.00"	22.00"
Depth (See Note 1)	F	18.00"	18.00"	18.00"
OVERALL TANK (approx.):
Length	G	26.00"	39.25"	52.25"
Width	H	36.00"	36.00"	36.00"
Height	J	35.50"	35.50"	35.50"
OVERALL MACHINE (approx.):
Length	G	26.00"	39.25"	52.25"
Width (See Note 2)	L	44.50"	44.50"	44.50"
Height	M	70.50"	70.50"	70.50"
ROLLER PLATFORM:
Total Length		22.00"	35.00"	48.00"
SOLUTION LEVEL:
Height (nominal)	N	24.50"	24.50"	24.50"

SERVICE CONNECTIONS
MACHINE NUMBER:	24 1X	24 1.5X	24 2X
ALL MACHINES (heated or unheated):
Air Consumption (CFM) (See Note 2)	3-5	3-5	3-5
Air Supply (max. PSI) (See Note 3)	125	125	125
Air Inlet (NPT)	0.375"	0.375"	0.375"
Drain Valve (NPT)	1.25"	1.25"	1.25"
Overflow (NPT)	1.00"	1.00"	1.00"
Vapor Exhaust (diameter)	4.00"	4.00"	4.00"
Water Inlet (NPT)	0.50"	0.50"	0.50"
ELECTRICAL SUPPLY: (See Note 4)
240V/1/60Hz	53A	53A	103A
240V/3/60Hz	32A	32A	61A
480V/3/60Hz	18A	18A	32A
STEAM HEATED MACHINES:
Inlet/Outlet (NPT)	1.00"	1.00"	1.00"

GENERAL DATA
MACHINE NUMBER:	24 1X	24 1.5X	24 2X
Load Capacity @ 100 PSI (lbs.) (See Note 2)	150	150	150
Liquid Capacity (gal.)	85	130	170
Tank Wall Thickness (ga.)	#12	#12	#12
Shipping Weight (approx. lbs.)	500	550	600

HEATING DATA (See Notes 5 & 6)
MACHINE NUMBER:	24 1X	24 1.5X	24 2X
HOURLY FUEL CONSUMPTION FROM COLD START:
Electric (kW) (See Note 4)	12	12	24
HEAT TIME FROM COLD START:
Electric (hrs.)	2-4	2-4	2-4

AGITATION DATA FOR ALL MACHINES (See Note 7)
MACHINE NUMBER:	24 1X	24 1.5X	24 2X
Short Stroke (See Note 8)	2.5-4.0"	2.5-4.0"	2.5-4.0"
Long Stroke (See Note 9)	In-Out	In-Out	In-Out
STROKES (per min.): (See Note 10)
Short	120-160	120-160	120-160
Long	20-30	20-30	20-30

BASKET DIMENSIONS (other sizes available)
MACHINE NUMBER:		24 1X	24 1.5X	24 2X
Length	Y	20.00'	33.00"	46.00"
Width	X	20.00"	20.00"	20.00"
Depth	Z	8.00"	8.00"	8.00"

NOTES

1. Dipping Depth (F) reduced by 6" when ultrasonics are installed. Request extra-deep tank to maintain full dipping depth.
2. 450 lb. load capacity, Overall Machine Width (L) becomes 54.50", Air Consumption becomes 7-11 CFM.
3. Lighter loads can operate at reduced air pressure.
4. Fully immersed stainless steel sheathed elements on all electrically heated units. Other voltages and phases on request.
5. Fuel consumption and heat up times listed are based on heating from room temperature to 180°F.
6. Contact factory for steam heated information.
7. The data shown is typical and may vary with air pressure, load weight, shape, and stroke length.
8. Maximum part height is 12" - 14" for full immersion cleaning.
9. Long stroke is advantageous in flushing out blind holes in parts.
10. A stroke equals travel in one direction.